Customer CaseUSA Scrap Recycling / EAF Steelmaking Supply
Standardized Scrap Steel Baling for Predictable Truck Loading in the USA
A US scrap recycler supplying electric arc furnace steel mills introduced a standardized hydraulic baling station to contain loose mixed steel scrap, reduce repeated handling and coordinate bale output with scheduled truck arrivals.
Project context
A professional scrap recycling company in the United States supplies ferrous raw material to electric arc furnace (EAF) steel mills. Its daily intake includes loose mixed steel scrap, thin-gauge sheet-metal sections and workshop offcuts.
The customer wanted a dependable, standardized baling station that would fit the existing yard. The priority was to organize material handling and dispatch without introducing a complex processing line.
Loose scrap had spread into equipment access lanes, while irregular loads made truck and container loading difficult to plan. This project focused on creating repeatable bale dimensions and a steady operating rhythm between the yard and the loading area.
Material & site requirements
Three connected bottlenecks made dispatch difficult:
Yard congestion: loose scrap spread into equipment routes and required repeated relocation.
Inefficient loading: irregular sheet-metal sections and offcuts left large voids in trucks and containers, reducing the weight carried within the available loading space.
Unpredictable loading windows: operators could not reliably coordinate material preparation with vehicle arrivals.
The station needed to turn suitable mixed ferrous scrap into consistent, stackable units while fitting the existing handling routine. Material preparation and finished bale specifications must remain compatible with the receiving steel mill.
Loose light ferrous scrap — material illustration from the image library.
Steel stamping offcuts — material illustration from the image library.
Equipment & configuration
The project brief specifies a Dershan Y83-250 turn-out hydraulic baler with PLC automatic control and a manual valve backup.
| Item | Project specification |
|---|---|
| Model | Y83-250 |
| Nominal pressing force | 315-ton class |
| Charging chamber | 2500 × 1400 × 1000 mm |
| Bale dimensions | ≤800 × 500 × 500 mm |
| Cycle time | Approximately 120 seconds |
| Throughput | Approximately 4.5–5.0 tonnes/hour |
| Control | PLC automatic control with manual valve backup |
These figures describe the supplied project brief. Actual output depends on scrap composition, feed preparation and loading conditions; it should not be treated as a guaranteed output for every material mix.
Dual main cylinder equipment illustration; not a photograph of the US customer installation.
The operating workflow
Prepare the feed: organize incoming mixed steel scrap, sheet-metal sections and workshop offcuts for loading into the baling chamber.
Compact in a repeatable cycle: use the hydraulic baling station to produce consistent bale dimensions.
Turn out and stage: move the finished bales into the designated dispatch area, keeping access routes clear.
Load to the dispatch plan: coordinate accumulated bale output with scheduled truck or container arrivals.
The role of the baler is to make the handover from loose scrap storage to vehicle loading more predictable. A stated machine cycle is only one part of that process; loading, handling and staging also determine the practical dispatch rate.
Results and dispatch planning
According to the supplied customer feedback, standardized bales stacked more consistently and left visibly fewer voids during loading. Repeated handling—moving scrap, rebuilding piles and moving it again—was reduced, easing congestion around the loading area.
A steadier baling rhythm helped align prepared scrap with truck arrival windows. Dispatch could increasingly be organized around a plan rather than around the changing shape and spread of loose piles.
These are qualitative operating observations. No measured payload increase, transport-cost reduction or before-and-after productivity percentage was provided.
Project lesson: bale dimensional consistency can serve as a practical link between yard management, transport and steel mill receiving. For a similar project, confirm the receiving mill’s bale specification before selecting a machine on throughput alone.
Compacted scrap bale — image-library illustration, not a measured output sample from this project.
Frequently asked questions
Why use a standard baling station instead of a complex line?
The customer needed a reliable step between loose-scrap storage and dispatch. A standalone station addressed handling and loading consistency within the existing yard workflow.
Which materials were involved?
The project handles loose mixed steel scrap, thin-gauge sheet-metal sections and workshop offcuts. Individual scrap sizes and suitability should be reviewed before equipment selection.
Why are bale dimensions important for EAF steel mill supply?
Consistent dimensions help organize stacking and loading, but the receiving mill’s requirements remain the selection basis. Bale size alone does not establish acceptance of every scrap grade or load.
Is 4.5–5.0 tonnes per hour guaranteed?
This is the approximate capacity stated in the project brief. Material composition, feed preparation and the handling routine affect actual hourly output.
What should a recycler provide when planning a similar station?
Provide material photographs, incoming scrap dimensions, the required bale size, the receiving mill’s specifications, loading windows and available yard space. Compare heavy duty dual main cylinder metal balers and side turn-out scrap metal balers, or contact Dershan for a configuration review.