News & InsightTechnical Knowledge

Aluminum Can Baler Selection: Bale Size, Throughput and Feeding

Start with the cans you collect and the bales your buyer accepts. Connect daily volume, feeding, collection and transport before selecting a machine.

Front-discharge hydraulic baler with used beverage cans in its blue loading chamber.
Can-baling reference from the image library. Match bale requirements, feeding and discharge to the actual collection process.

Plan your aluminum-can baling process

An aluminum can baler should connect two practical requirements: processing the cans your operation actually collects and producing bales that your receiving recycler can handle and accept. A machine selected only by compression force can leave important questions unanswered about feeding, storage and transport.

Used beverage cans, often called UBCs, also arrive in different conditions. Whole cans, flattened cans and mixed collection loads do not fill a chamber in the same way. The best starting point is a clear description of your feed, daily collection pattern and outbound bale requirements.

Compressed used beverage-can bale from the image library.

Example of a compressed can bale. Agree bale dimensions, material quality and handling requirements with the receiving buyer.

Establish your daily can volume

Record the mass of prepared aluminum cans available for baling during a normal day and during your busiest collection periods. Keep rejected packaging and other removed material separate from the usable feed record. If collections are tracked by bags, bins or vehicle loads, weigh representative batches rather than assuming every container holds the same mass.

Record volume as well as weight where practical. Loose whole cans and previously flattened cans can occupy different amounts of storage and loading space for the same material mass. Include photographs showing the usual condition, not only a specially prepared sample.

Also explain when material arrives. A steady collection stream and one large delivery near the end of a shift create different feeding and buffer needs. Identify how much prepared material can wait safely before baling and how soon it must be cleared for the next collection.

Define a clean, controlled UBC feed

DSBale's Side-Push Aluminum Can Baler is described for suitable, prepared used beverage cans. Its guidance starts with sorted aluminum cans that are empty and prepared to the agreed receiving specification.

Before discussing a machine configuration:

  • Separate steel cans, glass, plastic packaging and other unwanted items according to your buyer's requirements.

  • Empty and drain cans through the approved collection process, and describe remaining moisture or food residue.

  • Identify whether cans arrive whole, flattened, bagged or mixed with packaging.

  • Exclude batteries, aerosol cans, gas cylinders and sealed, pressurized or unknown containers from the ordinary UBC stream.

Baling does not perform sorting, washing or drying. A compact bale can still fail a buyer's contamination requirements, so the preparation plan should be established before selecting the compression equipment.

Set bale size with the receiving buyer

Ask the receiving recycler for acceptable bale dimensions, weight range and handling condition. Clarify whether the buyer has restrictions connected with unloading equipment, storage or the downstream process. These requirements should guide machine selection rather than being checked after installation.

A larger bale is not automatically more useful. The package must suit your lifting equipment and the buyer's receiving arrangement. Equally, a smaller bale may create more individual handling movements for a given shipment. Compare the alternatives using your actual collection and dispatch method.

Treat size, weight and density as separate requirements. Specifying rectangular dimensions alone does not establish the mass of a can bale. Feed condition, loading and machine configuration influence the result. DSBale's can-baler information does not provide one universal bale weight or production rate for every UBC operation; these need confirmation for the selected machine and representative cans.

Match feeding to how cans reach the machine

The HBT side-push can-baler page identifies manual or grabber feeding, subject to the approved workflow. Review the practical interface between collection containers, preparation and the charging position. Confirm loading height, material presentation and safe separation from moving parts.

If your plan involves a conveyor, hopper or other feeding equipment, request a specific integration review. Do not assume these items are supplied because an illustration or another installation shows them. Define what is included and how the feed is controlled.

Whole cans, flattened cans and irregular mixed loads should be assessed in their real incoming condition. Avoid choosing a feeding arrangement from an unusually tidy demonstration batch. Operators must not reach into the chamber to rearrange cans while movement is possible; clearing and cleaning require the approved isolation procedure.

Turn daily volume into a realistic processing requirement

Use the amount of prepared cans that must be processed and the time genuinely available for baling to define the required working rate. Allow for normal preparation, loading and collection activities rather than treating the full shift as uninterrupted compression time.

For UBC operations, consistency of feed is especially relevant. Confirm whether proposed performance relates to whole or flattened cans, the recorded contamination and moisture condition, and the agreed bale. A trial should include normal feeding and removal, with bale mass and elapsed time recorded. Force and motor power alone cannot establish that result.

Connect bale discharge with transport

The HBT arrangement pushes the finished bale sideways into a planned receiving area. DSBale also offers the HBQ Front Discharge Metal Baler, whose product information includes prepared beverage cans among materials that can be reviewed. HBQ pushes the bale forward. Compare the two routes against your available collection space.

Check the path from discharge to storage and then to the outbound vehicle. Review bale handling suitability, storage arrangements, vehicle loading access and applicable transport requirements with the relevant operators. Compaction changes the form of the material, but no fixed reduction in freight cost follows from a product name or photograph.

Request a configuration around your can stream

Send DSBale photographs of your usual cans, normal and peak daily mass, incoming material form, feeding plan and the buyer's bale requirements. Include your available space, electrical supply and collection route. Request an aluminum-can baler recommendation that identifies the proposed bale, feeding scope, discharge arrangement and conditions under which production performance will be assessed. This gives the equipment review a concrete starting point and helps connect collection, baling and dispatch into a workable process.

Need equipment matched to your material and production target?

Contact Our Team