Metal Balers

Dual Main Cylinder Baler for Metal Scrap

HBK material review from prepared steel offcuts to a defined baling proposal

Dual Main Cylinder Baler for Metal Scrap from the HBK family, with horizontal hydraulic compression and grab-out collection for assessed, prepared steel sheet and plate offcuts.

HBK familyTwin main cylindersHydraulic compressionGrab-out bale handling
Suitable materials

PRODUCT VIDEO

Dual Main Cylinder Baler for Metal Scrap video

01 / PRODUCT DESCRIPTION

Material Preparation and Procurement Review with HBK

Define the application before choosing a machine specification.

Material Preparation and Procurement Review with HBK

HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.

The Dual Main Cylinder Baler for Metal Scrap belongs to the HBK horizontal hydraulic baler family. Twin main cylinders form part of the compression system, with grab-out collection for completed bales. This page covers prepared steel sheet and plate offcuts and explains how to build a useful material submission for equipment selection. The broad title does not establish suitability for every metal, scrap form or thickness.

A clear procurement review starts with the feed, then connects it to the required bale and operating method. Describe what arrives today, which variations are expected and what preparation will happen before loading. Use that information to review the machine proposal, rather than treating a general product name or a photograph as a complete technical specification.


02 / MATERIALS & OUTPUT

Prepared Steel Sheet and Plate Offcuts

Describe representative material and preparation requirements.

Record grade, maximum dimensions, actual thickness, shape and contamination. Distinguish flat offcuts from curled strips or nested remnants when these forms occur in the stream. Photographs should show individual pieces with a meaningful scale reference as well as a typical loose batch. Explain whether occasional oversized pieces will be removed or prepared under an approved separate procedure.

Keep the review specific to prepared sheet and plate offcuts. Do not infer approval for heavy beams, complete structures or other material forms from the metal scrap wording. Identify contamination and unsuitable items before loading, and agree the acceptable feed envelope for the selected chamber and compression arrangement. Construction steel thickness is a machine attribute, not a processed-scrap thickness rating.


Loose thin strip and sheet-metal offcuts
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Formed sheet-metal stamping remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Perforated sheet skeletons and trim
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Loose bent sheet and strip remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.

03 / STRUCTURE & FEATURES

Equipment features.

HBK-family hydraulic metal baler with twin main cylinders; equipment reference

Compression, Controls and Handling Interfaces

Review series features against the selected supply scope.

Horizontal hydraulic layout: HBK combines a charging chamber with twin-main-cylinder compression and grab-out bale collection. Confirm the final hydraulic sequence in the selected machine documentation.

Control selection: the series source lists PLC automatic or manual control. Optional remote control requires explicit confirmation in the supply scope.

Wear components: the source identifies interchangeable wear steel plates and NM450 or Hardox450 alternatives. Confirm the selected material and replacement details in the proposal.

Handling interfaces: specify approved loading and bale collection equipment, operating clearances and protected work areas. A grab-out designation does not establish an included crane.

Review guards, interlocks, emergency stops and maintenance access with the final configuration. Product illustrations and a series-level feature list do not replace machine-specific operating instructions or installation documentation.


04 / WORKING PRINCIPLE

Approved Loading and Baling Sequence

Coordinate safe preparation, compression and bale collection.

  1. Prepare: sort approved offcuts, check dimensions and exclude batteries, sealed or pressurized containers and hazardous contamination.

  2. Load: use the approved feeding method with personnel outside the operating zone.

  3. Compress: operate the documented hydraulic sequence under the selected control arrangement.

  4. Collect: remove the bale using suitable grab-out handling equipment and the designated route.

  5. Reset: complete the prescribed checks before the next charge.

Only trained personnel should operate the equipment. Follow the machine manual and site isolation procedures for inspection, clearing obstructions or maintenance, including stored hydraulic energy. Never reach into the chamber or attempt to reposition material during operation.


05 / TECHNICAL REFERENCE

HBK Series Parameters and Selection

Selected attributes require a model-specific technical proposal.

The table presents selected HBK series attributes, not a complete model specification. Confirm the final combination, material limits, chamber dimensions, force, power and bale requirements in the technical proposal. Numerical output and bale properties require defined feedstock and operating conditions.

Mechanical attributeHBK series reference / option
Control optionsPLC automatic or manual control, according to configuration
Wear-plate material optionsNM450 or Hardox450, according to configuration
Motor voltageCustomized; confirm site supply and selected model
Construction steelQ235B; machine construction steel
Bale shape referenceSquare / cube; confirm selected dimensions
Wear plate replacementInterchangeable


07 / QUESTIONS & SUPPORT

Product questions,
answered.

HBK Project Questions

Six practical answers for material and procurement review.

Which measurements are most useful for material review?

Provide actual thickness, maximum length and width, grade, physical form and contamination details. Show typical and occasional extreme pieces separately. The light-gauge ferrous scrap guidance helps organize the application discussion, but it does not replace model-specific feed limits or approval of the submitted material.

Must offcuts be prepared before baling?

The scope is prepared offcuts suitable for the selected equipment. Describe existing sorting and size preparation and ask for confirmation of the allowable material envelope. Do not force oversized pieces into the chamber or treat the ability to lift a piece as evidence that the baler can process it.

What does the dual-main-cylinder arrangement establish?

It identifies two main cylinders in the HBK compression arrangement. It does not by itself establish force, output, bale density or a fixed chamber size. Review these requirements against the actual material and the machine-specific proposal, including the approved loading and collection sequence.

How should competing equipment proposals be compared?

Give suppliers the same material description, bale requirements and operating assumptions. Compare the stated supply scope and test conditions as well as the selected specifications. The quotation checklist provides a useful framework for identifying missing details before considering proposals equivalent.

Can sample bale images prove the proposed result?

No. A photograph may illustrate a material form or appearance without establishing grade, mass, density or the machine used. For a defined result, agree an evaluation with representative material and documented loading, compression and collection conditions, then assess the bales against the receiving requirements.

What is the next step after preparing material details?

Combine the material submission with expected shift quantities, available services, a layout and the intended handling method, then contact Dershan. Discuss any material variation or unresolved receiving requirement explicitly so the proposal and evaluation scope reflect the actual project rather than a generic scrap category.


Equipment Recommendation

Tell Us About Your Material and Capacity

Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

✓ Material & Capacity Review✓ Configuration Recommendation✓ Pricing & Lead-Time Inquiry

We use this information only to respond to your equipment inquiry.