Metal Balers

Dual Main Cylinder Metal Recycling Baler

HBK dual-cylinder baling for prepared steel-sheet recovery

The HBK dual-main-cylinder metal recycling baler compacts prepared scrap using a horizontal hydraulic arrangement and grab-out bale handling. Connect scrap recycling requirements to baler selection.

HBK familyTwin main cylindersHydraulic compressionGrab-out bale handling
Suitable materials

PRODUCT VIDEO

Dual Main Cylinder Metal Recycling Baler video

01 / PRODUCT DESCRIPTION

Connect scrap recycling requirements to baler selection

Match the family configuration to the complete working arrangement.

Connect scrap recycling requirements to baler selection

HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.

The HBK dual-main-cylinder metal recycling baler compacts prepared scrap using a horizontal hydraulic arrangement and grab-out bale handling. This page addresses steel sheet and plate offcuts intended for recycling. A useful selection process follows the material from its source through preparation and baling to the receiving recycler, with agreement on the bale condition and the handling arrangements at each stage.

HBK is a product family, not a fixed numerical specification. The exact supplied machine, control arrangement and handling interfaces should be confirmed together. Equipment and material photographs are references; they do not establish measured production results or permissible feed limits. Keep the agreed feed description and bale requirements available when reviewing configuration details with Dershan.


02 / MATERIALS & OUTPUT

Prepared steel sheet and plate offcuts

Document the material in the form presented for loading.

Identify the production source of the offcuts and maintain a clear description of the prepared material. Record grade where known, thickness, maximum dimensions and any coatings or contamination requiring review. Keep distinct material streams identifiable where the receiving recycler has different acceptance requirements. Baling changes the physical form of the charge; it should not be used as a substitute for appropriate sorting or material identification.

The light-gauge ferrous scrap guide and stamping steel scrap guide provide related preparation context. Confirm suitability for the selected machine before introducing unfamiliar scrap, and keep material awaiting approval separate from the agreed charging stream.


Loose thin strip and sheet-metal offcuts
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Formed sheet-metal stamping remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Perforated sheet skeletons and trim
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Loose bent sheet and strip remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.

03 / STRUCTURE & FEATURES

Equipment features.

HBK-family hydraulic metal baler with twin main cylinders; equipment reference

HBK architecture and configuration

Confirm the selected machine and handling interfaces together.

The HBK twin-main-cylinder architecture and hydraulic drive describe the equipment family. The selected chamber, control arrangement and handling interfaces still need confirmation for the actual project. Recycling-oriented wording does not establish a separate hardware model, a particular recovery yield or a guaranteed transport saving. Assess the complete configuration against the prepared offcuts and the requirements of the next receiving operation.


04 / WORKING PRINCIPLE

Operating sequence and site coordination

Coordinate preparation, compression and bale collection.

Agree the preparation and acceptance checks before establishing the loading routine. After compression, collect bales using the approved grab-out arrangement and place them in the designated area. Keep records that allow the site to relate assessed bale condition to the material charged. If the feed source changes, review the difference before treating the new batch as equivalent to the material used during selection.

Only trained personnel should operate the selected machine using its instructions and the site procedure. Keep people clear of the chamber and moving equipment. Service work and blockage removal require authorized isolation of all energy sources; never enter or clear a chamber while the equipment can operate.


05 / TECHNICAL REFERENCE

HBK specifications and selection

Source-backed attributes require application-specific confirmation.

Mechanical attributeHBK series reference / option
Motor voltageCustomized; confirm site supply and selected model
Wear-plate material optionsNM450 or Hardox450, according to configuration
Bale shape referenceSquare / cube; confirm selected dimensions
Construction steelQ235B; machine construction steel
Control optionsPLC automatic or manual control, according to configuration
Wear plate replacementInterchangeable

The table will present selected source-backed HBK series attributes. Confirm the final configuration against representative prepared offcuts, site utilities, loading and collection arrangements, and the required bale condition. A displayed selection of attributes does not establish a separate model or a jointly validated set of numerical ratings.


07 / QUESTIONS & SUPPORT

Product questions,
answered.

HBK application questions

Six practical answers for selecting and using the HBK family.

Does baling replace sorting before recycling?

No. Baling compacts the prepared charge; it does not establish material purity or the receiving recycler's acceptance. Identify the feed and agree appropriate sorting before processing. Keep unfamiliar or unsuitable material outside the approved stream until its effect on handling, bale condition and downstream requirements has been reviewed.

What should be agreed with the receiving recycler?

Confirm material acceptance, desired bale dimensions, acceptable bale condition and handling requirements. Keep these requirements available when discussing the baler configuration. The scrap metal baler quotation checklist helps connect downstream needs with the actual feed, site utilities and the equipment proposed for loading and collection.

Can this page confirm a recycling yield or sale price?

No. The product information describes an equipment family and a prepared sheet-scrap application. Recovery yield, settlement terms and sale price depend on the material and receiving operation. Obtain those requirements directly from the relevant parties rather than treating baling equipment terminology as a commercial or metallurgical guarantee.

How should a new offcut source be assessed?

Compare its grade, thickness, dimensions, coatings and loose form with the material already reviewed. Provide representative photographs and identify any preparation differences. The light-gauge ferrous scrap guide offers related application guidance; a new source still requires confirmation against the selected machine and receiving requirements.

What is a useful measure of production for recycling?

Define accepted bale output and measure it over a stated working period that includes normal loading and collection. Record rejects and interruptions separately so the result can be understood. Use the baler throughput planning guide when preparing an assessment, rather than assuming every completed compression cycle produces equivalent accepted output.

How do I start an HBK recycling application review?

Prepare a description of the steel sheet and plate offcuts, expected quantities, working hours, site utilities and collection equipment. Add the receiving recycler's bale requirements and any known material restrictions. Then contact Dershan to discuss a consistent selected configuration and the information still needed for the application.


Equipment Recommendation

Tell Us About Your Material and Capacity

Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

✓ Material & Capacity Review✓ Configuration Recommendation✓ Pricing & Lead-Time Inquiry

We use this information only to respond to your equipment inquiry.