Metal Balers
Dual Main Cylinder Scrap Metal Baler
HBK dual-cylinder baling with application-led material selection
HBK horizontal hydraulic baler with twin main cylinders and grab-out handling for prepared steel sheet and plate offcuts. Match the baler to the sheet-scrap stream.
PRODUCT VIDEO
Dual Main Cylinder Scrap Metal Baler video
01 / PRODUCT DESCRIPTION
Match the baler to the sheet-scrap stream
Application-led selection within the HBK family.
Match the baler to the sheet-scrap stream
HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.
The HBK dual-main-cylinder family compacts prepared metal scrap in a horizontal hydraulic chamber, with grab-out collection of the formed bale. For this application, the material scope is prepared steel sheet and plate offcuts. Selection should connect three practical questions: what enters the chamber, what bale the receiving recycler requires, and how the site will move both safely.
HBK identifies a product family rather than one fixed set of numerical ratings. This product title describes that family. The final machine specification should follow an application review and an agreed supply scope.
02 / MATERIALS & OUTPUT
Prepared steel sheet and plate offcuts
Describe the material in its normal working condition.
Describe the normal mix by source rather than calling everything mixed steel. Stamping skeletons, narrow strips and flat plate offcuts can occupy the charging space differently. Where those forms occur in the proposed sheet-scrap stream, provide photographs and representative dimensions for each, together with the approximate proportions encountered during normal production.
The material scope described here does not approve every metal form or thickness. Confirm acceptable feed against the selected machine and keep unsuitable items out of the charging stream. See light-gauge ferrous scrap and stamping steel scrap for related application considerations.
03 / STRUCTURE & FEATURES
Equipment features.
Twin main cylinders and selected configuration
Confirm architecture, options and supply scope together.
Dual main cylinders describe the compression architecture, not two independently documented product models. The equipment specification still needs to define the selected chamber, control arrangement and interfaces for loading and collection. Treat a list of available series attributes as a starting point for this review rather than assuming every listed alternative is supplied together.
Interchangeable wear plates are listed at series level. Their selected material and replacement requirements belong in the confirmed specification. Equipment images illustrate the machine arrangement; material and bale photographs are examples, not measured evidence of HBK output, density or material limits.
04 / WORKING PRINCIPLE
Operating sequence and site planning
Coordinate material preparation, compression and collection.
Before defining a loading routine, establish which scrap streams will be kept separate and which proposed blends need assessment. Record changes between shifts or production jobs. A material description based only on the easiest batch can overlook the pieces that actually interrupt loading or change the condition of the finished bale.
The general sequence is material inspection and preparation, loading by the approved method, hydraulic compression under the selected controls, and grab-out bale collection. Follow the machine-specific operating instructions and keep people clear of the chamber and moving equipment. Never enter or clear the chamber while the machine can operate; maintenance and blockage removal require authorized isolation procedures.
05 / TECHNICAL REFERENCE
HBK specifications and selection
Series attributes require machine-specific confirmation.
| Mechanical attribute | HBK series reference / option |
|---|---|
| Wear plate replacement | Interchangeable |
| Remote control | Optional |
| Motor voltage | Customized; confirm site supply and selected model |
| Drive | Hydraulic drive |
| Bale shape reference | Square / cube; confirm selected dimensions |
| Construction steel | Q235B; machine construction steel |
The parameter table presents selected HBK series attributes, not a separate hardware model created by this product title. Confirm the final configuration against the actual scrap, site utilities and handling plan. Force, installed power, chamber dimensions, bale dimensions and production expectations require a consistent machine-specific specification rather than values combined from unrelated ranges.
07 / QUESTIONS & SUPPORT
Product questions,
answered.
HBK application questions
Six practical answers for material and equipment selection.
What should a useful sheet-scrap enquiry include?
Include photographs, steel grade if known, thickness range, maximum piece dimensions and the expected mix of flat, curled and irregular offcuts. Add operating hours, incoming quantities and required bale handling arrangements. A representative description is more useful than a single photograph of the cleanest material.
Which materials does this page cover?
The application described is prepared steel sheet and plate offcuts. Suitability depends on actual material properties, dimensions and preparation. The stamping steel scrap application provides useful context, but it does not replace review of the feed proposed for your selected HBK configuration.
What should be confirmed about the finished bale?
Agree the receiving recycler's requirements, intended handling method, dimensions and acceptable bale condition. Do not infer a fixed weight or density from photographs. Include these requirements in the quotation checklist so that material preparation, equipment selection and downstream handling are considered together.
How should expected throughput be assessed?
Include normal charging, compression and grab-out collection in the production assessment. Material variation and handling availability can change the result. The throughput planning guide explains why accepted bale mass and elapsed working time matter more than an isolated cycle or cylinder count.
What checks belong in the operating routine?
Follow the selected machine's operating and maintenance manual for checks of guards, hydraulic connections, wear surfaces and controls. Stop and report abnormal conditions through the site procedure. Servicing or blockage removal requires authorized isolation of all energy sources. Ask Dershan about model-specific inspection requirements when confirming the equipment.
How do I request an HBK configuration review?
Send representative material photographs, grade if known, thickness and piece dimensions, daily quantities, operating hours, electrical supply and bale requirements through DSBale contact. Include the proposed loading and collection arrangement. These details allow the enquiry to address the actual application without treating this title as a separate hardware SKU.
Equipment Recommendation
Tell Us About Your Material and Capacity
Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

