Metal Balers

Heavy Duty Hydraulic Scrap Metal Baler with Twin Main Cylinders

HBK selection through a clear material and equipment specification

HBK horizontal hydraulic baler with twin main cylinders and grab-out collection for prepared steel sheet and plate offcuts. Prepare an HBK purchase specification.

HBK familyTwin main cylindersHydraulic compressionGrab-out bale handling
Suitable materials

PRODUCT VIDEO

Heavy Duty Hydraulic Scrap Metal Baler with Twin Main Cylinders video

01 / PRODUCT DESCRIPTION

Prepare an HBK purchase specification

HBK selection through a clear material and equipment specification

Prepare an HBK purchase specification

HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.

A useful specification for the HBK heavy duty hydraulic scrap metal baler starts with the proposed work, not a list of attractive ratings. This family uses twin main cylinders, horizontal hydraulic compression and grab-out bale collection. The application discussed here is prepared steel sheet and plate offcuts. Identify the normal feed, the required bale condition and the handling equipment available before asking for a selected machine proposal.

Keep the purchase specification in three parts: material information, equipment scope and acceptance requirements. This separates what the site needs from what a supplier proposes. The heavy duty wording in the title does not establish a fixed feed thickness, force or production rate. Those items require confirmation for the selected configuration and the agreed application.


02 / MATERIALS & OUTPUT

Prepared steel sheet and plate offcuts

Define the proposed feed and preparation before selection.

Prepare a material schedule covering grade where known, thickness range, largest regular piece dimensions and typical shapes. Distinguish flat offcuts from curled strips, nested sheets or perforated skeletons. State any sorting or cutting that will occur before loading, and identify coatings, contamination or occasional pieces that require separate review.

Photographs should show the normal variation, with dimensions supplied separately. A photograph of an unusually tidy pile is a poor basis for a routine production requirement. The light-gauge ferrous scrap guide provides preparation context; it does not approve every sheet or plate stream for every HBK configuration.


Loose thin strip and sheet-metal offcuts
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Formed sheet-metal stamping remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Perforated sheet skeletons and trim
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Loose bent sheet and strip remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.

03 / STRUCTURE & FEATURES

Equipment features.

HBK-family hydraulic metal baler with twin main cylinders; equipment reference

HBK architecture and selected configuration

Confirm the equipment scope and application interfaces.

Specify the HBK family architecture separately from the options to be confirmed. Hydraulic drive and twin main cylinders describe the compression arrangement. Grab-out identifies the bale collection approach. Ask the proposal to state the selected chamber, control arrangement and equipment supplied for loading and collection rather than assuming these follow from the product title.

The source includes configuration alternatives. Keep options described as options until selected, and check that the final proposal is internally consistent. Document who provides site utilities, handling equipment and installation information. A clear scope boundary prevents a machine-only quotation from being compared directly with a broader package.


04 / WORKING PRINCIPLE

From prepared material to collected bale

Use the approved sequence and record relevant conditions.

Describe the working sequence from accepted material to collected bale: preparation, approved loading, compression under the selected controls, and grab-out removal. Include where material waits and where finished bales will be placed. The site must review access and personnel separation around moving equipment, not only the baler footprint.

For any assessment, agree what will be observed and record the feed condition alongside the result. Use representative prepared offcuts and an agreed collection arrangement. Follow the machine instructions and site procedure; servicing, fault investigation and blockage removal require authorized isolation of energy sources. Never substitute improvised hand feeding or chamber access for the approved procedure.


05 / TECHNICAL REFERENCE

HBK series references and selection

Confirm a coherent selected specification for the application.

Mechanical attributeHBK series reference / option
Wear-plate material optionsNM450 or Hardox450, according to configuration
Bale shape referenceSquare / cube; confirm selected dimensions
Wear plate replacementInterchangeable
Bale dischargeGrab-out
Construction steelQ235B; machine construction steel
Motor voltageCustomized; confirm site supply and selected model

The following attributes are HBK series references or configuration options, not a separately verified fixed model. Confirm the selected specification against the prepared material, available utilities, loading method and grab-out collection arrangement. Numerical ratings and material limits require application-specific confirmation. Construction materials describe the machine itself, not permissible scrap thickness or grade.


07 / QUESTIONS & SUPPORT

Product questions,
answered.

HBK application questions

Six practical questions for the selection discussion.

What information makes quotations comparable?

Give each supplier the same material description, bale requirement and scope boundary. Ask each proposal to identify the selected equipment and exclusions. The baler quotation checklist helps organize the enquiry so a price comparison is not obscured by different assumptions about loading, collection or site work.

Does heavy duty specify the maximum scrap thickness?

No fixed feed thickness follows from that phrase. Provide the thickness and dimensions of the prepared sheet and plate offcuts for application review. Machine construction plate thickness is not an allowable scrap thickness, and a family-level description cannot replace a selected specification.

Should I request one fixed control arrangement?

State how the site intends to operate the machine and ask for a clearly identified control arrangement. The HBK source pool includes PLC automatic or manual alternatives; it does not establish that every offered machine has both. Confirm the selected controls and operating responsibilities in the final proposal.

What should a bale acceptance record contain?

Record the prepared feed used, the requested bale condition and the collection method. Agree any measurements with the receiving recycler and equipment supplier before an assessment. Photographs may help describe condition, but they do not establish bale weight, density or suitability for a particular receiving process.

Can a video supply the production target?

The supplied HBK video is a visual reference for the stated sheet and plate application. It is not a measured production test. Use the throughput planning guide to define an assessment that includes material loading, collection and interruptions, rather than extrapolating from a selected clip.

How should unresolved requirements be handled?

List the open items and the person responsible for confirming each one before equipment selection is finalized. Contact Dershan with the material schedule, site constraints and receiving requirements. Keep uncertain values marked for confirmation rather than inserting a convenient number from an unrelated model or source range.


Equipment Recommendation

Tell Us About Your Material and Capacity

Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

✓ Material & Capacity Review✓ Configuration Recommendation✓ Pricing & Lead-Time Inquiry

We use this information only to respond to your equipment inquiry.