Metal Balers
Heavy Duty Metal Baling Press with Dual Main Cylinders
HBK selection based on receiving, collection and bale requirements
HBK horizontal hydraulic baler with twin main cylinders and grab-out collection for prepared steel sheet and plate offcuts. Connect bale requirements to press selection.
PRODUCT VIDEO
Heavy Duty Metal Baling Press with Dual Main Cylinders video
01 / PRODUCT DESCRIPTION
Connect bale requirements to press selection
HBK selection based on receiving, collection and bale requirements
Connect bale requirements to press selection
HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.
The heavy duty metal baling press with dual main cylinders is an HBK family presentation for prepared steel sheet and plate offcuts. Its horizontal hydraulic compression and grab-out collection should be considered alongside the requirements of the operation receiving the bale. A compact-looking bale is not, by itself, proof of acceptable dimensions, handling condition or suitability for a recycler's process.
Begin the selection discussion with both ends of the application: the prepared feed entering the press and the bale required downstream. Ask the receiving operation to describe its acceptance conditions and ask the equipment supplier to review them against the proposed configuration. This avoids choosing a machine around an unsupported assumption about the finished product.
02 / MATERIALS & OUTPUT
Prepared steel sheet and plate offcuts
Define the proposed feed and preparation before selection.
Document the steel offcuts by grade where known, thickness, piece dimensions and physical form. Explain sorting, cutting or other preparation performed upstream and identify coatings or contamination that need review. Keep information about occasional exceptional pieces separate from the normal production stream.
The light-gauge ferrous material guide provides useful preparation context. Material photographs should identify the forms being discussed, but they are not measurements of bale density or evidence of a matched HBK production test. Confirm the proposed feed and the receiving requirements together before finalizing the selected arrangement.
03 / STRUCTURE & FEATURES
Equipment features.
HBK architecture and selected configuration
Confirm the equipment scope and application interfaces.
The HBK family uses twin main cylinders and hydraulic compression. Grab-out collection is part of the layout to be reviewed, including the equipment used to remove and place the bale. Confirm the selected chamber and controls and establish the supply boundary for any handling equipment.
The title's heavy duty wording does not define bale mass, density or output. Likewise, a family-level bale shape reference does not supply all dimensions required by a receiving operation. Ask for a coherent specification and agreed assessment conditions instead of combining unrelated values from different presentations into a supposed fixed model.
04 / WORKING PRINCIPLE
From prepared material to collected bale
Use the approved sequence and record relevant conditions.
Plan preparation, approved loading, compression and grab-out collection as one sequence. Consider where the collected bale will be placed and how it will move to its next destination. The site should review the suitability of its handling equipment and the operating area rather than assume an existing arrangement can accept a new bale condition.
During an assessment, record the feed, the selected arrangement and the agreed bale observations together. Use qualified personnel and the machine instructions for operation. Keep personnel outside hazardous working areas; servicing and blockage investigation require authorized energy isolation. Assessment activities must not introduce improvised handling or access to an energized chamber.
05 / TECHNICAL REFERENCE
HBK series references and selection
Confirm a coherent selected specification for the application.
| Mechanical attribute | HBK series reference / option |
|---|---|
| Feeding alternatives | Grabber or manual, subject to the specified installation |
| Wear plate replacement | Interchangeable |
| Control options | PLC automatic or manual control, according to configuration |
| Layout | Horizontal |
| Bale shape reference | Square / cube; confirm selected dimensions |
| Drive | Hydraulic drive |
The following attributes are HBK series references or configuration options, not a separately verified fixed model. Confirm the selected specification against the prepared material, available utilities, loading method and grab-out collection arrangement. Numerical ratings and material limits require application-specific confirmation. Construction materials describe the machine itself, not permissible scrap thickness or grade.
07 / QUESTIONS & SUPPORT
Product questions,
answered.
HBK application questions
Six practical questions for the selection discussion.
What should a receiving recycler specify?
Ask for its requirements for bale dimensions, material condition and handling, plus any information needed for acceptance. Record these before equipment selection. The quotation checklist helps connect the receiving requirement with the material description and the proposed machine scope.
Can a photograph prove the bale meets those requirements?
A photograph can describe appearance and show the material form, but it cannot establish dimensions, weight or density without measurements and context. Agree what needs to be measured during an assessment. Treat equipment and material images on this page as references, not as documented acceptance results.
Is a square or cube reference enough to order?
No. The receiving operation needs a clearly defined bale requirement, and the selected machine proposal must address it. A shape description does not provide a complete set of dimensions or a fixed mass. Keep the requirement and the proposed configuration explicit rather than filling gaps with assumptions.
Does grab-out determine the collection equipment?
It describes the collection approach, while the actual handling equipment and procedure require site-specific selection. Confirm who supplies that equipment and who verifies its intended duty. The description does not establish an included crane, a particular lifting capacity or an approved layout for every installation.
How should output be judged for a receiving operation?
Define accepted output in the terms the receiving operation uses and record the complete elapsed working period. Include loading, collection and interruptions. The throughput planning guide helps avoid comparing an isolated press cycle with the practical output of the complete working arrangement.
What if the receiving requirement changes later?
Compare the revised requirement with the original feed and selected specification before changing normal operation. Contact Dershan with the new bale requirement and details of any associated handling changes. Do not assume that a different bale condition is available from the same setup without review.
Equipment Recommendation
Tell Us About Your Material and Capacity
Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

