Metal Balers
Heavy Duty Metal Scrap Baler with Dual Main Cylinders
HBK hydraulic compression for prepared sheet and plate offcuts
HBK horizontal hydraulic baler with twin main cylinders and grab-out handling for prepared steel sheet and plate offcuts. Plan heavy-duty scrap handling around the actual feed.
PRODUCT VIDEO
Heavy Duty Metal Scrap Baler with Dual Main Cylinders video
01 / PRODUCT DESCRIPTION
Plan heavy-duty scrap handling around the actual feed
Application-led selection within the HBK family.
Plan heavy-duty scrap handling around the actual feed
HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.
For sheet-metal production and scrap-recovery sites, baler selection starts with the material that arrives at the charging area. The HBK family combines a horizontal hydraulic layout with dual main cylinders and grab-out bale handling. This page focuses on preparing steel sheet and plate offcuts for a controlled baling workflow, from receiving inspection through bale collection.
HBK identifies a product family rather than one fixed set of numerical ratings. This product title describes that family. The final machine specification should follow an application review and an agreed supply scope.
02 / MATERIALS & OUTPUT
Prepared steel sheet and plate offcuts
Describe the material in its normal working condition.
Record the longest and widest pieces, their thickness range, and whether the offcuts are flat, curled or nested. A pile of similar-looking steel can contain pieces with very different resistance to compression. Keep a record of normal material and occasional oversized pieces separately so the latter do not silently determine an unsuitable loading routine.
The material scope described here does not approve every metal form or thickness. Confirm acceptable feed against the selected machine and keep unsuitable items out of the charging stream. See light-gauge ferrous scrap and stamping steel scrap for related application considerations.
03 / STRUCTURE & FEATURES
Equipment features.
Twin main cylinders and selected configuration
Confirm architecture, options and supply scope together.
The heavy-duty wording in the title does not define an allowable feed thickness or a force rating. Select the chamber and hydraulic configuration together with the proposed material preparation. The twin-cylinder arrangement identifies the HBK family architecture; it does not establish how every piece of scrap will deform or what bale weight will result.
Interchangeable wear plates are listed at series level. Their selected material and replacement requirements belong in the confirmed specification. Equipment images illustrate the machine arrangement; material and bale photographs are examples, not measured evidence of HBK output, density or material limits.
04 / WORKING PRINCIPLE
Operating sequence and site planning
Coordinate material preparation, compression and collection.
Establish a receiving area where offcuts can be sorted before they reach the baler. Keep incoming scrap, the loading route and the finished-bale route clearly separated in the site plan. Determine how rejected or oversized material will be held for further preparation rather than allowing it to become an interruption at the chamber.
The general sequence is material inspection and preparation, loading by the approved method, hydraulic compression under the selected controls, and grab-out bale collection. Follow the machine-specific operating instructions and keep people clear of the chamber and moving equipment. Never enter or clear the chamber while the machine can operate; maintenance and blockage removal require authorized isolation procedures.
05 / TECHNICAL REFERENCE
HBK specifications and selection
Series attributes require machine-specific confirmation.
| Mechanical attribute | HBK series reference / option |
|---|---|
| Control options | PLC automatic or manual control, according to configuration |
| Layout | Horizontal |
| Remote control | Optional |
| Bale shape reference | Square / cube; confirm selected dimensions |
| Wear-plate material options | NM450 or Hardox450, according to configuration |
| Bale discharge | Grab-out |
The parameter table presents selected HBK series attributes, not a separate hardware model created by this product title. Confirm the final configuration against the actual scrap, site utilities and handling plan. Force, installed power, chamber dimensions, bale dimensions and production expectations require a consistent machine-specific specification rather than values combined from unrelated ranges.
07 / QUESTIONS & SUPPORT
Product questions,
answered.
HBK application questions
Six practical answers for material and equipment selection.
Does heavy duty mean all plate scrap can be loaded directly?
No. The title does not set a maximum scrap thickness, hardness or piece size. Submit representative sheet and plate offcuts for review, including the largest pieces and any preparation already planned. Construction plate thickness is a machine-building detail, not an approved feedstock limit.
Which materials does this page cover?
The application described is prepared steel sheet and plate offcuts. Suitability depends on actual material properties, dimensions and preparation. The stamping steel scrap application provides useful context, but it does not replace review of the feed proposed for your selected HBK configuration.
What should be confirmed about the finished bale?
Agree the receiving recycler's requirements, intended handling method, dimensions and acceptable bale condition. Do not infer a fixed weight or density from photographs. Include these requirements in the quotation checklist so that material preparation, equipment selection and downstream handling are considered together.
How should expected throughput be assessed?
Include normal charging, compression and grab-out collection in the production assessment. Material variation and handling availability can change the result. The throughput planning guide explains why accepted bale mass and elapsed working time matter more than an isolated cycle or cylinder count.
What checks belong in the operating routine?
Follow the selected machine's operating and maintenance manual for checks of guards, hydraulic connections, wear surfaces and controls. Stop and report abnormal conditions through the site procedure. Servicing or blockage removal requires authorized isolation of all energy sources. Ask Dershan about model-specific inspection requirements when confirming the equipment.
How do I request an HBK configuration review?
Send representative material photographs, grade if known, thickness and piece dimensions, daily quantities, operating hours, electrical supply and bale requirements through DSBale contact. Include the proposed loading and collection arrangement. These details allow the enquiry to address the actual application without treating this title as a separate hardware SKU.
Equipment Recommendation
Tell Us About Your Material and Capacity
Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

