Metal Balers

Hydraulic Baler for Metal Scrap with Dual Main Cylinders

HBK dual-cylinder baling with controls and handling coordination

HBK horizontal hydraulic baler with twin main cylinders and grab-out collection for prepared steel sheet and plate offcuts. Coordinate hydraulic operation with material handling.

HBK familyTwin main cylindersHydraulic compressionGrab-out bale handling
Suitable materials

PRODUCT VIDEO

Hydraulic Baler for Metal Scrap with Dual Main Cylinders video

01 / PRODUCT DESCRIPTION

Coordinate hydraulic operation with material handling

Connect equipment selection with the actual working conditions.

Coordinate hydraulic operation with material handling

HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.

The HBK hydraulic baler for metal scrap combines dual main cylinders with a horizontal layout and grab-out bale collection. The application described is prepared steel sheet and plate offcuts. Equipment selection should connect hydraulic compression with the activities immediately before and after it: presenting a suitable charge, operating the selected controls and collecting the formed bale using the agreed handling method.

Each title describes the same HBK product family, not a separate hardware model. Final configuration and material suitability require review together. Use the selected machine specification and operating instructions for the actual installation.


02 / MATERIALS & OUTPUT

Prepared steel sheet and plate offcuts

Define material properties, shape and upstream preparation.

Describe the offcuts in the form delivered to the charging position. Flat sheets, bent strips and irregular plate remnants may require different preparation and presentation, even when their material category is the same. Provide normal and maximum piece dimensions, thickness information and grade where known. Identify whether the material mix changes between jobs so the review covers ordinary operating variation.

Related preparation guidance is available in the light-gauge ferrous scrap guide and stamping steel scrap guide. These references provide context; they do not extend this application to every metal form or replace confirmation of the proposed feed.


Loose thin strip and sheet-metal offcuts
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Formed sheet-metal stamping remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Perforated sheet skeletons and trim
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Loose bent sheet and strip remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.

03 / STRUCTURE & FEATURES

Equipment features.

HBK-family hydraulic metal baler with twin main cylinders; equipment reference

HBK architecture and selected configuration

Confirm the family architecture and project-specific supply scope.

The HBK source offers PLC automatic control or manual control as alternatives and describes remote control as optional. These choices belong in the selected specification. Neither automatic controls nor twin main cylinders establish an unattended line or prove that loading and collection equipment is included. Confirm the operating sequence, control responsibilities and interfaces for the actual installation rather than combining every available option into one assumed machine.


04 / WORKING PRINCIPLE

Operating and assessment guidance

Coordinate loading, compression and collection under the approved procedure.

Define the readiness conditions for loading, compression and collection using the supplied machine instructions. Allocate responsibility for the handling equipment and ensure the working arrangement keeps personnel clear of moving parts. When assessing production, distinguish the hydraulic portion of the sequence from waiting for feed or collection. This prevents a handling delay from being mistaken for a compression problem or an isolated movement time from being treated as full production.

Only trained personnel should operate the machine under its instructions and the site procedure. Keep people clear of the chamber and moving equipment. Service work, fault intervention and blockage removal require authorized isolation of all energy sources; never enter or clear the chamber while it can operate.


05 / TECHNICAL REFERENCE

HBK specifications and selection

Source-backed series attributes require configuration confirmation.

Mechanical attributeHBK series reference / option
Construction steelQ235B; machine construction steel
LayoutHorizontal
Motor voltageCustomized; confirm site supply and selected model
DriveHydraulic drive
Remote controlOptional
Bale dischargeGrab-out

The parameter table presents six selected, source-backed HBK series attributes. Confirm the final configuration against the actual prepared offcuts, utilities, loading and collection arrangements, and required bale condition. A selection of source attributes is not proof of a separate model or a jointly validated set of numerical ratings.


07 / QUESTIONS & SUPPORT

Product questions,
answered.

HBK application questions

Six practical answers for this application review.

Are automatic and manual controls always supplied together?

The source lists PLC automatic control or manual control as alternatives. Confirm the selected arrangement and any agreed operating modes in the actual specification. Do not infer that every machine includes both options or that a general product title defines the control package supplied for your installation.

Does optional remote control permit unattended operation?

No unattended operating capability is established here. Remote control is a source-listed option whose functions and operating requirements need confirmation. It does not replace trained personnel, the selected machine instructions or the site arrangements governing material loading, exclusion areas, fault response and safe bale collection.

What should be agreed at the loading and collection interfaces?

Identify the handling equipment, working positions and responsibilities at each stage. Confirm what the baler supplier provides and what the site supplies. Review access and coordination using the actual layout, especially if a grabber or other handling equipment serves several activities and is not continuously available beside the baler.

How should the hydraulic cycle be used in production planning?

Treat it as one part of the complete working sequence. Include material presentation, loading and grab-out collection when assessing accepted output over time. The throughput planning guide explains how to define the observation period and operating conditions without turning a partial cycle into an unsupported production promise.

What should operators do when abnormal movement is observed?

Follow the selected machine instructions and site fault procedure, keeping people clear of the chamber and moving equipment. Report the condition and prevent further operation where the procedure requires it. Fault investigation or intervention must use authorized energy isolation; do not attempt adjustments during compression or collection.

Which control details should accompany an enquiry?

Provide the intended operator responsibilities, available handling equipment, material description, electrical supply and working pattern. Record any required control options as requests for confirmation. The quotation checklist helps organize these details before you contact Dershan to discuss the selected configuration and its operating interfaces.


Equipment Recommendation

Tell Us About Your Material and Capacity

Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

✓ Material & Capacity Review✓ Configuration Recommendation✓ Pricing & Lead-Time Inquiry

We use this information only to respond to your equipment inquiry.