Metal Balers

Hydraulic Metal Scrap Compression Press with Twin Main Cylinders

Defining a model-specific supply specification | HBK series

Hydraulic Metal Scrap Compression Press with Twin Main Cylinders for prepared metal scrap. Defining a model-specific supply specification. Review HBK hydraulic configuration, chamber dimensions and grab-out bale handling for your project.

HBK familyTwin main cylindersHydraulic compressionGrab-out bale handling
Suitable materials

PRODUCT VIDEO

Hydraulic Metal Scrap Compression Press with Twin Main Cylinders video

01 / PRODUCT DESCRIPTION

Defining a model-specific supply specification

Hydraulic compression and handling for your recycling project.

HBK Specifications, Applications & Configuration

Dual-main-cylinder hydraulic baling for prepared scrap. Select the configuration around your material, bale requirements and site layout.

The Hydraulic Metal Scrap Compression Press with Twin Main Cylinders is an HBK-series horizontal hydraulic baler for compacting prepared metal scrap into square bales. Its dual main cylinder arrangement is paired with grab-out bale collection for subsequent handling, storage and transport.

Defining a model-specific supply specification

Use the HBK series reference as the starting point for a complete equipment specification. Confirm chamber and bale dimensions, hydraulic arrangement, controls, utilities and grab-out handling together. The accepted proposal should define the configuration intended for the actual material.

Use the technical table below as a series reference. Confirm the actual feed dimensions, material grade, working schedule and selected configuration before ordering. For output assessment, consult the scrap metal baler production planning guide.

02 / MATERIALS & OUTPUT

Applicable Scrap & Bale Output

Prepare and assess the incoming material before selecting a machine.

This dual-main-cylinder metal baler handles prepared stainless steel scrap, waste reinforcing bars, light-gauge ferrous scrap, copper tubes and depolluted end-of-life vehicle metal scrap. Confirm the grade, thickness, hardness and dimensions against the selected machine configuration.

  • Stainless steel scrap for hydraulic baling: Sort stainless steel by grade; assess thickness and piece dimensions for the selected chamber.

  • Waste reinforcing steel bars before preparation: Cut long reinforcing bars to the approved feed size and remove concrete and other contaminants before baling.

  • Light-gauge ferrous sheet and strip scrap: Thin sheet, strip and stamping offcuts can be compacted into manageable bales; assess springback and loading consistency.

  • Scrap copper tubes for separate-grade recycling: Keep copper tubes separate from ferrous scrap, drain residual fluids and confirm dimensions before loading.

  • End-of-life vehicle body scrap awaiting preparation: Vehicle scrap must be dismantled and depolluted before baling; batteries, fuels and pressurized parts must be removed. Whole-vehicle acceptance is model-dependent.

Use separate batches for different metal grades. Oversized or entangled material requires suitable cutting or preparation. Square bales help organize storage and downstream handling; bale mass and density depend on the feed material and selected configuration.

Material photographs are reference examples, not a matched production trial. See our stamping steel scrap guide for related preparation advice.

Waste reinforcing steel bars before preparation
Cut long reinforcing bars to the approved feed size and remove concrete and other contaminants before baling.
Light-gauge ferrous sheet and strip scrap
Thin sheet, strip and stamping offcuts can be compacted into manageable bales; assess springback and loading consistency.
Scrap copper tubes for separate-grade recycling
Keep copper tubes separate from ferrous scrap, drain residual fluids and confirm dimensions before loading.
End-of-life vehicle body scrap awaiting preparation
Vehicle scrap must be dismantled and depolluted before baling; batteries, fuels and pressurized parts must be removed. Whole-vehicle acceptance is model-dependent.

03 / STRUCTURE & FEATURES

Equipment features.

Dual-main-cylinder metal scrap baler — equipment view 2

Structure & Features

Choose the components and options that match your application.

Dual main cylinders: an HBK hydraulic compression arrangement for metal scrap baling.

Horizontal chamber: choose the chamber dimensions to suit prepared feed and loading access.

Grab-out handling: coordinate loading and bale collection equipment with the working area.

Wear protection: interchangeable NM450 or Hardox450 wear plates are listed as configuration options.

Control choice: PLC automatic or manual control, with optional remote control.

Hydraulic cooling: water cooling or an industrial chiller can be specified for the installation.

Confirm selected components and accessories in the quotation. Equipment images show HBK-family examples and do not define the supply scope of every configuration.

04 / WORKING PRINCIPLE

Baling Process & Maintenance

Coordinate preparation, loading, compression and collection.

  1. Sort the scrap, remove unsuitable items and prepare pieces to the agreed feed specification.

  2. Load the chamber using the approved handling method and keep personnel outside the operating area.

  3. Run the compression sequence specified for the selected control system.

  4. Remove the completed bale with the approved grab and transfer it to a designated storage area.

  5. Inspect hydraulic connections, wear surfaces and cooling equipment at the intervals in the machine instructions.

For planning, measure the complete loading, compression and collection cycle. The baler throughput guide explains how handling and downtime affect actual output.

05 / TECHNICAL REFERENCE

HBK Series Technical Parameters

Series ranges and options; confirm a model-specific specification.

ParameterHBK series reference / configuration option
SeriesHBK
Layout / driveHorizontal / hydraulic
Main compression arrangementDual main cylinders
Bale removalGrab-out
Working pressure21.5 MPa
Chamber length range2,000–4,000 mm
Chamber width range1,500–3,000 mm
Chamber height range1,000–1,400 mm
Bale cross-section range500 × 500 to 800 × 800 mm
Cycle reference120–180 seconds per bale; no-load reference 120 seconds
Machine weight range45,000–150,000 kg
Oil tank volume range4,000–15,000 L
Electrical supply optionsThree-phase, 220–660 V, 50/60 Hz; selected to suit the installation
Control optionsPLC automatic or manual
Remote controlOptional
Construction steelQ235B
Wear-plate optionsNM450 or Hardox450; interchangeable plates
Cooling optionsWater cooling or industrial chiller

These are series ranges and options from the HBK specification sheet, not the fixed specification of one machine. Final dimensions, utilities and cycle performance depend on the selected configuration and material. Compression force, installed motor power, throughput and bale weight are confirmed in the model-specific proposal.

07 / QUESTIONS & SUPPORT

Product questions,
answered.

Frequently Asked Questions

Practical answers on materials, operation and configuration.

What materials can this HBK baler process?

The machine can process prepared stainless steel, waste rebar, light-gauge ferrous scrap, copper tubes and depolluted vehicle metal scrap, subject to the selected configuration. Cut oversized bars, sort metal grades and remove contaminants. Vehicle scrap requires dismantling and depollution; not every model accepts a whole vehicle. Confirm feed dimensions and thickness before ordering.

How is the finished bale removed?

The HBK sheet specifies grab-out removal. The installation therefore needs a suitable handling arrangement and space for collecting and stacking bales. Confirm the grab, lifting capacity and equipment supply scope with the machine proposal.

Are all the listed parameter ranges available on one machine?

No. The table describes the HBK series and its configuration options. Chamber dimensions, utilities, controls and other ratings must be combined into one selected specification. Ask for a model-specific drawing and parameter schedule.

Is automatic control available?

The sheet lists PLC automatic and manual control alternatives, with remote control as an option. Choose the control arrangement according to the feeding process, staffing and site requirements; confirm the supplied functions before ordering.

How should production capacity be evaluated?

Use a representative material sample and include loading, compression, bale removal and ordinary interruptions in the measurement. Material shape, preparation and handling all affect output. Refer to the production planning guide when comparing proposals.

Which document should be used for final acceptance?

Use the agreed model-specific specification and drawings, together with the stated material and operating conditions. Series ranges alone do not define one delivered machine.

Equipment Recommendation

Tell Us About Your Material and Capacity

Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

✓ Material & Capacity Review✓ Configuration Recommendation✓ Pricing & Lead-Time Inquiry

We use this information only to respond to your equipment inquiry.