Horizontal hydraulic layout: HBK combines a charging chamber with twin-main-cylinder compression and grab-out bale collection. Confirm the final hydraulic sequence in the selected machine documentation.
Metal Balers
Industrial Metal Baler with Twin Main Cylinders
HBK industrial scrap handling coordinated with collection and shift planning
Industrial Metal Baler with Twin Main Cylinders from the HBK family, with horizontal hydraulic compression and grab-out collection for assessed, prepared steel sheet and plate offcuts.
PRODUCT VIDEO
Industrial Metal Baler with Twin Main Cylinders video
01 / PRODUCT DESCRIPTION
Industrial Collection and Operating Schedule with HBK
Define the application before choosing a machine specification.
Industrial Collection and Operating Schedule with HBK
HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.
The Industrial Metal Baler with Twin Main Cylinders is a presentation of the HBK horizontal hydraulic baler family. Its two main cylinders are part of the compression arrangement, and formed bales are collected by grab-out handling. This page considers prepared steel sheet and plate offcuts from industrial operations, concentrating on scrap collection, batch presentation and the operating schedule. The title does not create a distinct model or guarantee a particular production capacity.
Map the route from production scrap collection to completed bale storage. Identify who supplies material, when batches arrive and which handling equipment is shared with other work. This gives the selection review a practical basis: the proposed machine and workflow must fit the way the factory actually manages scrap, including busy periods and normal interruptions.
02 / MATERIALS & OUTPUT
Prepared Steel Sheet and Plate Offcuts
Describe representative material and preparation requirements.
List recurring steel offcut streams separately. For each stream, describe grade, thickness, maximum dimensions, physical form and contamination. Record whether scrap arrives in containers or as loose accumulated batches, and explain any preparation before feeding. If a production change alters the scrap shape or size, include that variation rather than basing the assessment only on the easiest material.
Review segregation requirements alongside collection frequency. Some streams may need to remain identifiable for downstream recycling, even when the material appears similar. Photographs of typical stamping remnants, sheet trim and prepared plate offcuts can support the review, but pictures alone cannot confirm grade, allowable feed limits or production results for the selected HBK machine.
03 / STRUCTURE & FEATURES
Equipment features.
Compression, Controls and Handling Interfaces
Review series features against the selected supply scope.
Control selection: the series source lists PLC automatic or manual control. Optional remote control requires explicit confirmation in the supply scope.
Wear components: the source identifies interchangeable wear steel plates and NM450 or Hardox450 alternatives. Confirm the selected material and replacement details in the proposal.
Handling interfaces: specify approved loading and bale collection equipment, operating clearances and protected work areas. A grab-out designation does not establish an included crane.
Review guards, interlocks, emergency stops and maintenance access with the final configuration. Product illustrations and a series-level feature list do not replace machine-specific operating instructions or installation documentation.
04 / WORKING PRINCIPLE
Approved Loading and Baling Sequence
Coordinate safe preparation, compression and bale collection.
Prepare: sort approved offcuts, check dimensions and exclude batteries, sealed or pressurized containers and hazardous contamination.
Load: use the approved feeding method with personnel outside the operating zone.
Compress: operate the documented hydraulic sequence under the selected control arrangement.
Collect: remove the bale using suitable grab-out handling equipment and the designated route.
Reset: complete the prescribed checks before the next charge.
Only trained personnel should operate the equipment. Follow the machine manual and site isolation procedures for inspection, clearing obstructions or maintenance, including stored hydraulic energy. Never reach into the chamber or attempt to reposition material during operation.
05 / TECHNICAL REFERENCE
HBK Series Parameters and Selection
Selected attributes require a model-specific technical proposal.
The table presents selected HBK series attributes, not a complete model specification. Confirm the final combination, material limits, chamber dimensions, force, power and bale requirements in the technical proposal. Numerical output and bale properties require defined feedstock and operating conditions.
| Mechanical attribute | HBK series reference / option |
|---|---|
| Motor voltage | Customized; confirm site supply and selected model |
| Bale discharge | Grab-out |
| Drive | Hydraulic drive |
| Remote control | Optional |
| Control options | PLC automatic or manual control, according to configuration |
| Construction steel | Q235B; machine construction steel |
07 / QUESTIONS & SUPPORT
Product questions,
answered.
HBK Project Questions
Six practical answers for material and procurement review.
Should factory selection use average or peak scrap quantities?
Provide both the normal shift quantity and the timing of busy collection periods. Explain any buffer storage and shared handling equipment. The production planning guide helps frame the full workflow; an average alone can hide a short period when loading or bale collection becomes the limiting step.
How should stamping offcuts be described?
Record grade, actual thickness, maximum dimensions, nesting and the way remnants collect before loading. Include representative photographs and explain preparation. The stamping steel scrap application guide offers application context, while the selected machine’s approved limits must come from the material and configuration review.
Does the industrial title mean a complete automated line?
No. The page describes the HBK baler family and grab-out collection. Conveyors, cranes, integrated loading equipment and other accessories must be separately identified in the supply scope. Confirm the chosen controls and interfaces without assuming an entire line is included.
Who should participate in the layout review?
Include the people responsible for scrap collection, loading, machine operation, bale removal and maintenance. Review storage areas, travel routes and service access together. The final arrangement should keep personnel clear of moving machinery and follow the selected machine’s documented operating requirements.
How should output be checked during an evaluation?
Use representative offcuts and the intended loading and collection arrangements. Measure accepted bale mass over complete elapsed operating time, recording meaningful interruptions and material changes. A short demonstration or a no-load cycle does not independently establish the quantity available over a normal factory shift.
What makes an industrial quotation request useful?
Provide material and shift information, receiving bale requirements, a floor plan and details of site-owned handling equipment. Use the quotation checklist to organize the request, then contact Dershan with the intended operating schedule and any constraints that affect installation or collection.
Equipment Recommendation
Tell Us About Your Material and Capacity
Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

