Metal Balers

Twin Main Cylinder Hydraulic Scrap Baler

HBK twin-cylinder baling for material and production assessment

HBK horizontal hydraulic baler with twin main cylinders and grab-out handling for prepared steel sheet and plate offcuts. Evaluate production with representative offcuts and complete cycles.

HBK familyTwin main cylindersHydraulic compressionGrab-out bale handling
Suitable materials

PRODUCT VIDEO

Twin Main Cylinder Hydraulic Scrap Baler video

01 / PRODUCT DESCRIPTION

Evaluate production with representative offcuts and complete cycles

Application-led selection within the HBK family.

Evaluate production with representative offcuts and complete cycles

HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.

The HBK twin-main-cylinder hydraulic scrap baler compacts prepared material using a horizontal hydraulic layout and grab-out bale collection. This page addresses steel sheet and plate offcuts and the information needed to assess a proposed installation. Cylinder count is one architectural feature; a useful production assessment also covers loading, material variation, bale collection and normal operating interruptions.

HBK identifies a product family rather than one fixed set of numerical ratings. This product title describes that family. The final machine specification should follow an application review and an agreed supply scope.

02 / MATERIALS & OUTPUT

Prepared steel sheet and plate offcuts

Describe the material in its normal working condition.

Choose assessment material that represents normal production, including the larger or less convenient offcuts that regularly occur. Describe thickness and piece-size variation, the condition of the loose pile and any preparation performed upstream. A selected batch of short, uniform pieces may not represent the mixture that the site will handle throughout a working shift.

The material scope described here does not approve every metal form or thickness. Confirm acceptable feed against the selected machine and keep unsuitable items out of the charging stream. See light-gauge ferrous scrap and stamping steel scrap for related application considerations.

Loose thin strip and sheet-metal offcuts
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Formed sheet-metal stamping remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Perforated sheet skeletons and trim
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.
Loose bent sheet and strip remnants
Steel-sheet material reference. Confirm grade, thickness, dimensions and preparation for the selected HBK configuration; not a matched HBK production trial.

03 / STRUCTURE & FEATURES

Equipment features.

HBK-family hydraulic metal baler with twin main cylinders; equipment reference

Twin main cylinders and selected configuration

Confirm architecture, options and supply scope together.

The twin-main-cylinder arrangement should be evaluated as part of the selected HBK configuration. It does not by itself establish output, energy consumption, bale density or a comparative advantage over another machine. Agree the proposed chamber, controls and handling interfaces before setting the conditions for an application review or representative material assessment.

Interchangeable wear plates are listed at series level. Their selected material and replacement requirements belong in the confirmed specification. Equipment images illustrate the machine arrangement; material and bale photographs are examples, not measured evidence of HBK output, density or material limits.

04 / WORKING PRINCIPLE

Operating sequence and site planning

Coordinate material preparation, compression and collection.

When reviewing expected production, define what counts as accepted output and which activities are included in elapsed time. Loading and grab-out collection belong in the working sequence. Record material changes, normal pauses and any preparation time separately so that estimates remain understandable and can be compared against the site's actual working pattern.

The general sequence is material inspection and preparation, loading by the approved method, hydraulic compression under the selected controls, and grab-out bale collection. Follow the machine-specific operating instructions and keep people clear of the chamber and moving equipment. Never enter or clear the chamber while the machine can operate; maintenance and blockage removal require authorized isolation procedures.

05 / TECHNICAL REFERENCE

HBK specifications and selection

Series attributes require machine-specific confirmation.

Mechanical attributeHBK series reference / option
LayoutHorizontal
Feeding alternativesGrabber or manual, subject to the specified installation
Remote controlOptional
Construction steelQ235B; machine construction steel
Control optionsPLC automatic or manual control, according to configuration
Bale dischargeGrab-out

The parameter table presents selected HBK series attributes, not a separate hardware model created by this product title. Confirm the final configuration against the actual scrap, site utilities and handling plan. Force, installed power, chamber dimensions, bale dimensions and production expectations require a consistent machine-specific specification rather than values combined from unrelated ranges.

07 / QUESTIONS & SUPPORT

Product questions,
answered.

HBK application questions

Six practical answers for material and equipment selection.

Can cylinder count determine hourly production?

No. Production also depends on the selected configuration, scrap characteristics, charging practice, bale collection and available operating time. Use representative material and a clearly defined complete working sequence when evaluating output. A compression-cycle figure alone is not a confirmed production rate for the installation.

Which materials does this page cover?

The application described is prepared steel sheet and plate offcuts. Suitability depends on actual material properties, dimensions and preparation. The stamping steel scrap application provides useful context, but it does not replace review of the feed proposed for your selected HBK configuration.

What should be confirmed about the finished bale?

Agree the receiving recycler's requirements, intended handling method, dimensions and acceptable bale condition. Do not infer a fixed weight or density from photographs. Include these requirements in the quotation checklist so that material preparation, equipment selection and downstream handling are considered together.

How should expected throughput be assessed?

Include normal charging, compression and grab-out collection in the production assessment. Material variation and handling availability can change the result. The throughput planning guide explains why accepted bale mass and elapsed working time matter more than an isolated cycle or cylinder count.

What checks belong in the operating routine?

Follow the selected machine's operating and maintenance manual for checks of guards, hydraulic connections, wear surfaces and controls. Stop and report abnormal conditions through the site procedure. Servicing or blockage removal requires authorized isolation of all energy sources. Ask Dershan about model-specific inspection requirements when confirming the equipment.

How do I request an HBK configuration review?

Send representative material photographs, grade if known, thickness and piece dimensions, daily quantities, operating hours, electrical supply and bale requirements through DSBale contact. Include the proposed loading and collection arrangement. These details allow the enquiry to address the actual application without treating this title as a separate hardware SKU.

Equipment Recommendation

Tell Us About Your Material and Capacity

Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

✓ Material & Capacity Review✓ Configuration Recommendation✓ Pricing & Lead-Time Inquiry

We use this information only to respond to your equipment inquiry.