Metal Balers
Twin Main Cylinder Metal Scrap Baler
HBK twin-cylinder compression with grab-out collection planning
HBK horizontal hydraulic baler with twin main cylinders and grab-out handling for prepared steel sheet and plate offcuts. Coordinate compression, bale collection and yard movement.
PRODUCT VIDEO
Twin Main Cylinder Metal Scrap Baler video
01 / PRODUCT DESCRIPTION
Coordinate compression, bale collection and yard movement
Application-led selection within the HBK family.
Coordinate compression, bale collection and yard movement
HBK family guidance for prepared steel sheet and plate offcuts. Confirm the selected machine and application before ordering.
The HBK twin-main-cylinder metal scrap baler is a horizontal hydraulic baler with grab-out bale handling. Its application here is prepared steel sheet and plate offcuts. For a recycling yard or manufacturing site, the complete working arrangement includes the charging area, compression chamber, bale collection equipment and a suitable destination for the collected bale.
HBK identifies a product family rather than one fixed set of numerical ratings. This product title describes that family. The final machine specification should follow an application review and an agreed supply scope.
02 / MATERIALS & OUTPUT
Prepared steel sheet and plate offcuts
Describe the material in its normal working condition.
Examine how the prepared offcuts will reach the loading position. Long strips, nested sheets and irregular plate pieces can make a material pile less predictable than its total weight suggests. Provide both individual-piece dimensions and photographs of a typical collection container or pile, so the material review reflects the form actually presented to the equipment.
The material scope described here does not approve every metal form or thickness. Confirm acceptable feed against the selected machine and keep unsuitable items out of the charging stream. See light-gauge ferrous scrap and stamping steel scrap for related application considerations.
03 / STRUCTURE & FEATURES
Equipment features.
Twin main cylinders and selected configuration
Confirm architecture, options and supply scope together.
Grab-out discharge makes the collection arrangement an important part of selection. Confirm the suitability and availability of the proposed handling equipment, its reach, and the planned bale destination. The presence of twin main cylinders does not show that a grabber, crane, conveyor or other handling system is included in the supply.
Interchangeable wear plates are listed at series level. Their selected material and replacement requirements belong in the confirmed specification. Equipment images illustrate the machine arrangement; material and bale photographs are examples, not measured evidence of HBK output, density or material limits.
04 / WORKING PRINCIPLE
Operating sequence and site planning
Coordinate material preparation, compression and collection.
Map the movement from loose-scrap storage to the chamber and from the chamber to the designated bale area. Identify any route shared with vehicles or other production activities. Resolve space and equipment access before estimating production, because a completed compression cycle still requires coordinated bale collection and preparation for the next charge.
The general sequence is material inspection and preparation, loading by the approved method, hydraulic compression under the selected controls, and grab-out bale collection. Follow the machine-specific operating instructions and keep people clear of the chamber and moving equipment. Never enter or clear the chamber while the machine can operate; maintenance and blockage removal require authorized isolation procedures.
05 / TECHNICAL REFERENCE
HBK specifications and selection
Series attributes require machine-specific confirmation.
| Mechanical attribute | HBK series reference / option |
|---|---|
| Drive | Hydraulic drive |
| Construction steel | Q235B; machine construction steel |
| Layout | Horizontal |
| Motor voltage | Customized; confirm site supply and selected model |
| Feeding alternatives | Grabber or manual, subject to the specified installation |
| Wear-plate material options | NM450 or Hardox450, according to configuration |
The parameter table presents selected HBK series attributes, not a separate hardware model created by this product title. Confirm the final configuration against the actual scrap, site utilities and handling plan. Force, installed power, chamber dimensions, bale dimensions and production expectations require a consistent machine-specific specification rather than values combined from unrelated ranges.
07 / QUESTIONS & SUPPORT
Product questions,
answered.
HBK application questions
Six practical answers for material and equipment selection.
Is grab-out equipment included with every HBK baler?
Do not assume it is included. Confirm the equipment supply boundary and the proposed loading and collection interfaces in the project specification. The site layout must allow the chosen handling equipment to reach its working positions and move bales to the agreed destination without conflicting with other activities.
Which materials does this page cover?
The application described is prepared steel sheet and plate offcuts. Suitability depends on actual material properties, dimensions and preparation. The stamping steel scrap application provides useful context, but it does not replace review of the feed proposed for your selected HBK configuration.
What should be confirmed about the finished bale?
Agree the receiving recycler's requirements, intended handling method, dimensions and acceptable bale condition. Do not infer a fixed weight or density from photographs. Include these requirements in the quotation checklist so that material preparation, equipment selection and downstream handling are considered together.
How should expected throughput be assessed?
Include normal charging, compression and grab-out collection in the production assessment. Material variation and handling availability can change the result. The throughput planning guide explains why accepted bale mass and elapsed working time matter more than an isolated cycle or cylinder count.
What checks belong in the operating routine?
Follow the selected machine's operating and maintenance manual for checks of guards, hydraulic connections, wear surfaces and controls. Stop and report abnormal conditions through the site procedure. Servicing or blockage removal requires authorized isolation of all energy sources. Ask Dershan about model-specific inspection requirements when confirming the equipment.
How do I request an HBK configuration review?
Send representative material photographs, grade if known, thickness and piece dimensions, daily quantities, operating hours, electrical supply and bale requirements through DSBale contact. Include the proposed loading and collection arrangement. These details allow the enquiry to address the actual application without treating this title as a separate hardware SKU.
Equipment Recommendation
Tell Us About Your Material and Capacity
Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

