Metal Balers

Side-Push Metal Baler Price and Specifications

Compare Quotations on the Same HBT Supply Scope

Compare Quotations on the Same HBT Supply Scope. Review the HBT configuration against the actual prepared scrap and site requirements.

Motor voltage: Configured for the installation electrical supplyModel series: HBTBale discharge: Side push-outFeeding arrangement: Manual or grabber, subject to the approved workflowMachine layout: Horizontal
Suitable materials

PRODUCT VIDEO

Side-Push Metal Baler Price and Specifications video

01 / PRODUCT DESCRIPTION

Compare Quotations on the Same HBT Supply Scope

A focused purchasing and operating decision for the existing HBT family.

Compare Quotations on the Same HBT Supply Scope

Compare Quotations on the Same HBT Supply Scope. Practical selection and acceptance guidance for the existing HBT side-push family.

Side-Push Metal Baler Price and Specifications should be reviewed together because a price without an identified configuration cannot show what equipment is being offered. The HBT family compresses suitable prepared scrap hydraulically and discharges the bale sideways. The relevant purchase decision is which configuration and supply scope meet the actual operation, not which isolated headline price appears lowest.

No verified public price list is provided on this page. An applicable quotation must come from the supplier for a defined requirement and state its own commercial conditions. This guide explains how to request and compare that quotation without inventing a price, discount, delivery promise or guaranteed production result.

Begin with the HBT machine overview and the appropriate material page. Then use the same requirement sheet for each quotation so differences in feed assumptions, included equipment and responsibilities remain visible.

02 / MATERIALS & OUTPUT

Prepare the Technical Requirement Before Comparing Prices

Prepare the Technical Requirement Before Comparing Prices.

Describe the accepted scrap by source, grade where known, form, normal dimensions and preparation condition. Include representative photographs and explain difficult normal pieces separately from exceptional or rejected material. A request for a metal baler without this information leaves suppliers to make different assumptions that can make their prices difficult to compare.

State the required receiving and handling conditions for the finished bale. Where dimensions, weight or performance are important, ask how the proposed values relate to the offered configuration and actual prepared feed. Do not combine the highest or lowest numbers from different reference rows into an imaginary machine specification.

Identify the site electrical supply, planned loading method, side-discharge receiving arrangement and available installation information. Full-automatic and semi-automatic options are available, but the quotation must describe the included control scope and operator duties. Automatic feeding, remote access and downstream handling should not be assumed from the option name.

Loose sheet and formed metal offcuts
Loose sheet and formed offcuts: verify grade, remove attachments and reduce oversize pieces before loading. Keep approved metal grades in separate batches.
Loose aluminum profile offcuts
Aluminum profile reference: separate alloys, remove inserts and attachments and cut long sections to the approved chamber limits.
Aluminum sheet and formed scrap pieces
Aluminum sheet reference before preparation: identify coatings and backing, remove non-metal residues and check thickness and dimensions.
Tangled bare copper wire scrap with visible metallic strands
Copper-wire reference: confirm grade and insulation status, remove contamination and agree preparation of long or tangled strands. Not a verified HBT trial.

04 / WORKING PRINCIPLE

Create a Like-for-Like Quotation Checklist

Create a Like-for-Like Quotation Checklist.

Place the machine configuration, included components and selected options on separate comparison lines. Add any proposed loading device, receiving equipment, installation work, training or spare-parts package only where it is actually offered. Mark absent or unclear items as unresolved rather than assuming that all suppliers include the same accessories.

Ask each quotation to identify its currency, validity and applicable delivery basis, together with the named delivery point and any separately stated transport, tax or installation charges. Those terms must come from the quotation itself. This page does not announce a standing warranty, payment schedule, shipping term or free-parts entitlement.

Record exclusions and customer responsibilities alongside the price. Electrical work, foundations, unloading and site preparation can affect the project even when they are outside the machine supplier's price. Have the responsible parties clarify each boundary before comparing totals or describing one proposal as a lower-cost complete solution.

05 / TECHNICAL REFERENCE

Selected HBT Technical Attributes

Five supported reference attributes, with configuration-dependent options stated separately.

These attributes describe the HBT side-push equipment family. Options and site-specific arrangements must be confirmed in the selected technical configuration.

Technical attributeHBT reference
Motor voltageConfigured for the installation electrical supply
Model seriesHBT
Bale dischargeSide push-out
Feeding arrangementManual or grabber, subject to the approved workflow
Machine layoutHorizontal

Force, chamber dimensions, bale weight and production rate are not inferred from a material title. Confirm those values against representative feedstock and the agreed machine configuration.

Operating options: full-automatic / semi-automatic, as confirmed by Dershan. The technical proposal defines the controlled actions and operator responsibilities. These option names do not establish automatic feeding, sorting, unattended operation or a guaranteed production rate.

Resolve Evidence Gaps Before Ordering

Resolve Evidence Gaps Before Ordering.

Request the documentation needed to evaluate the actual proposal, including the configuration identity, relevant drawings and the agreed acceptance basis. If a claimed performance figure matters to the purchase, ask which material and operating conditions support it. A photograph, a family label or an unrelated test result does not establish that the offered configuration will achieve it.

Keep optional upgrades distinct from the base offer and record how a change affects the scope. Do not silently replace a required feature with a cheaper alternative or assume that a missing specification can be added later without review. A clear comparison should show both confirmed facts and remaining decisions.

Include operating and maintenance responsibilities in the handover discussion. Ask for the applicable instructions and qualified support arrangements, rather than assuming that any quoted machine can be maintained safely without configuration-specific information. Actual operation, fault handling and maintenance must follow the supplied manual and shutdown and isolation procedures.

07 / QUESTIONS & SUPPORT

Product questions,
answered.

Side-Push Metal Baler Price and Specifications FAQ

Answers specific to this selection decision.

What is the price of this side-push baler?

A verified price is not established here. Request a quotation for the actual prepared feed, configuration and supply scope. The supplier’s current written offer should state the currency, validity and relevant commercial conditions.

Why can two HBT quotations have different prices?

They may cover different configurations, options, included equipment or responsibilities. Compare those lines before drawing a conclusion. A shared family name does not prove identical scope, and this page does not attribute a price difference to an unverified component.

Can the lowest catalog specification be used for budgeting?

Use only a configuration that actually addresses the requirement. A number taken from a general reference pool may not describe the proposed machine. Keep unresolved capacity, dimensions and other important values visible until confirmed.

Are shipping, installation and tax included?

Check the specific quotation and delivery basis. They are not automatically included by the product title or website description. Identify the destination and responsible parties, and list unresolved charges separately before comparing a project total.

Does a full-automatic option include every handling step?

No. The proposal must identify its actual control functions and any included external equipment. Loading, bale collection and transport preparation can remain separate responsibilities unless expressly included and technically defined.

What should be clarified before accepting an offer?

Confirm the configuration, approved feed, included scope, exclusions, documentation and acceptance conditions, along with the quotation’s commercial terms. Resolve important gaps in writing rather than treating an attractive price as evidence of a complete solution.

Equipment Recommendation

Tell Us About Your Material and Capacity

Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

✓ Material & Capacity Review✓ Configuration Recommendation✓ Pricing & Lead-Time Inquiry

We use this information only to respond to your equipment inquiry.