Metal Balers
Side Turn-Out Aluminum Scrap Baler
Keep Aluminum Streams Identifiable Through Baling
A Side Turn-Out Aluminum Scrap Baler forms suitable prepared aluminum scrap into handling bales using the HBF horizontal hydraulic arrangement. The formed bale is turned out toward a side receiving area. This application focuses on keeping the identity of aluminum streams clear while planning the loading and collection tasks around that discharge method.
PRODUCT VIDEO
Side Turn-Out Aluminum Scrap Baler video
01 / PRODUCT DESCRIPTION
Keep Aluminum Streams Identifiable Through Baling
Material preparation and side turn-out selection for the HBF family.
Keep Aluminum Streams Identifiable Through Baling
Plan HBF aluminum scrap baling with alloy separation, prepared feed, side turn-out handling and clear receiving-buyer requirements.
A Side Turn-Out Aluminum Scrap Baler forms suitable prepared aluminum scrap into handling bales using the HBF horizontal hydraulic arrangement. The formed bale is turned out toward a side receiving area. This application focuses on keeping the identity of aluminum streams clear while planning the loading and collection tasks around that discharge method.
Material recovery value depends on more than compactness. A mixed or contaminated package does not become a known alloy because it has been compressed. The preparation plan and the receiving buyer's specification therefore belong in the machine selection discussion from the start, alongside available space and handling equipment.
For dedicated streams, use the aluminum profile guide or the aluminum sheet guide. They address more specific geometry and handling decisions without implying that each application is a different HBF machine model.
02 / MATERIALS & OUTPUT
Separate Alloy Identity from Physical Form
Define the accepted feed and its preparation.
Describe the aluminum stream by both source and shape. Clean sheet trim, profile offcuts and collected aluminum packaging do not present the same preparation task. A machine review should distinguish their largest dimensions, section thickness and attachment conditions instead of relying on the broad label aluminum scrap.
Keep grades separate when the buyer requires alloy traceability. Steel screws, plastic inserts, rubber seals and nonmetal packaging can travel with profile or assembly scrap; baling will not remove them. The agreed preparation process should identify what must be removed and how uncertain pieces are held for assessment. Coated and oily material also needs an explicit receiving decision.
Dense castings and large assemblies are not automatically approved because they are aluminum. Review them independently from light offcuts. Exclude batteries, closed containers and hazardous articles. If the material changes between shifts, label the streams and retain separate preparation instructions so one accepted sample does not become an unrestricted feed permission.
The photographs illustrate separate aluminum feed and finished-bale forms. A pictured output package is a handling reference, not loose feed or evidence of a trial on this HBF configuration. The selection is not an instruction to mix every illustrated form in one charge.
04 / WORKING PRINCIPLE
Plan Collection Around the Turn-Out Movement
Review the complete turn-out and collection arrangement.
Hydraulic compression brings the approved charge into a bale, which the HBF turns toward the planned side receiving zone. Verify the movement and landing or receiving arrangement from the selected configuration drawing. Do not copy the collection layout of a side-push machine and assume the two discharge methods have identical access requirements.
Aluminum packages can contain exposed trim or pieces that move after release. Review their condition after turn-out and collection, including whether fragments remain in the receiving area. The agreed handling method should avoid relying on an operator to steady a moving bale or retrieve loose pieces during operation.
Include stock segregation in the physical layout. A receiving zone shared by different alloys requires a clear changeover and identification plan. Collection vehicles should not mix finished lots simply because the packages look alike. Preserve the link between the approved input stream and the outgoing bale through the normal storage and transport process.
05 / TECHNICAL REFERENCE
Selected HBF Mechanical Attributes
Five sourced attributes; series references and options require configuration confirmation.
These five attributes are selected from the supplied HBF side turn-out series information. They describe family features or configuration choices, not a complete specification for one machine.
| Technical attribute | HBF reference |
|---|---|
| Structural steel plate | Q235B |
| Electrical supply phase | Three-phase |
| Remote control | Optional; confirm the selected control configuration |
| Machine layout | Horizontal |
| Drive type | Hydraulic |
The selected configuration must be confirmed for the actual prepared scrap. A listed cross-section range does not include bale length or mean that every machine adjusts across the whole range. Force, output, power and bale weight are not inferred from the product title or photograph.
Control choices in the supplied information include PLC automatic or manual control; Dershan also confirms a semi-automatic option. Confirm the included actions and operator responsibilities in the proposal. These labels do not establish automatic loading, sorting or unattended operation.
Match the Proposal to the Actual Mix
Agree selection evidence, acceptance and maintenance responsibilities.
Provide the relative amounts of sheet, profiles and other proposed forms, together with photographs of the less convenient pieces. Explain whether feed arrives continuously or in separate lots and what collection equipment is available beside the machine. These details help assess the whole installation rather than an isolated compression function.
Agree the buyer's requirements for material identity, contamination and bale handling before choosing the output arrangement. Any trial should use representative prepared feed and examine the package after the normal turn-out route. Record the complete handling time if production is being evaluated, and do not infer remelting yield or guaranteed density from a tidy sample bale.
Inspect the machine and receiving area according to the supplied maintenance instructions. Guards, hoses, protective devices and specified wear components need attention suited to the actual duty. Cleaning, obstruction removal and repairs require approved isolation and stored-energy control. Use the contact page to submit the material and layout information for a configuration-specific review.
07 / QUESTIONS & SUPPORT
Product questions,
answered.
Side Turn-Out Aluminum Scrap Baler FAQ
Practical answers for this material and discharge arrangement.
Can different aluminum alloys be baled together?
Only where the receiving specification permits that mixture. Keep traceable streams separate when alloy identity matters, and agree an approach for unidentified pieces before they enter the collection bin.
Does baling remove steel fasteners or plastic inserts?
No. Attachments remain a preparation and acceptance issue. State their type and frequency in the inquiry and define the approved removal or rejection process before operating.
Are aluminum castings covered by a light-offcut setup?
Not automatically. Castings may differ substantially in thickness, shape and resistance to deformation. Submit them separately for review rather than adopting the sheet or profile loading conditions.
Can cans use the same loading plan as profiles?
Do not assume so. Used cans have their own collection and contamination concerns. Review the aluminum can application and define its accepted feed separately.
What should be observed during collection?
Inspect package integrity, exposed edges, released fragments and compatibility with the agreed handling equipment after normal turn-out. The safe receiving area must remain clear without workers guiding the bale by hand.
Does an aluminum title establish a production rate?
No. The actual feed mix, preparation, loading, compression and collection all affect throughput. Confirm any target against the offered configuration and the defined material rather than a series-wide assumption.
Equipment Recommendation
Tell Us About Your Material and Capacity
Share the key operating conditions below so our team can compare suitable equipment and prepare a practical configuration.

